Graveyard Fence

I cut Sixteen 2.5 foot lengths of 1/2 inch PVC as the fence bars.
I drilled holes in two 8 foot pieces of 1x2 wood. Their are 16 holes 6 inches apart (3 inches in from each end) and 0.875 (7/8) inch in diameter.
I slid the PVC through the holes and screwed each pipe in place with a single sheetrock screw.
Then the whole assembly was painted with flat black paint.
The almost completed fence.
Here's a shot of the fence in place.
Another use for the fence. Keeping people from getting hit by a pop-up prop inside a store.	(click image for video)